These are Hi-Lo test systems; the high flow pump can either be electrical or air-driven depending on the application. With this configuration, it will help to improve the efficiency of the work. Other components such as accumulators, electronic chart recorders and PLC can be added to the system for better performance and higher productivity. Specifications: • An electrical pump at 40 liters/min • A bank of 8 x 50 liters accumulators • An air driven liquid pump of flow rate at 4 liters/min • Maximum pressure up to 22,500 psi • A digital chart recorder and a test gauge at the outlet Specifications: • First pump at flow rate of 80 liters/min to 100 psi • Second pump at flow rate of 2 liters/min to 3,500 psi • Third pump at flow rate of 1.2 liters/min to 6,000 psi • The last pump at flow rate of 0.43 liters/min to 15,000 psi • Special air actuator valves and controls make this system easily operable by the user Specifications: • First air driven pump at flow rate of 13 liters/min to 3,500 psi • Second air driven pump at flow rate of 4 liters/min to 22,500 psi • All are mounted on a portable stainless skid for easy operation

They are mainly used for charging of high pressure gas cylinders and pressure testing of underwater Christmas trees and subsea components. Since gas is compressible, we must be very careful when selecting the correct gas booster for specific applications. When high flow rate is required, the gas compressor can be incorporated into the system for better performance. Specifications: • A gas compressor at flow rate of 1,300 liters/min to 5,000 psi • A bank of 50-liter gas cylinders of 5,000 psi • Gas boosters at flow rate of 1,000 liters/min to 15,000 psi • High pressure air actuator valves, special solenoid valves and digital chart recorders

These portable booster units are used for charging the cylinders or accumulators up to 3,000 psi or more. With all the necessary components installed, these units are easily operable by untrained workers. Portable gas boosters provide a fast, efficient and economical method of charging gas pressure in devices such as: • Hydraulic accumulators • Hydro gas suspension system in the aircraft industry • Helicopter emergency “Pop Float” • Charging escape chute inflation bottles • Charging oxygen life support bottles The units ensure that optimum use is made of commercially bottled gases down to as low as 150 psi. Units are standard or custom-built in a variety of configurations, depending on the customer’s requirements. Specifications: • Transfer of Oxygen Gas • For filling oxygen cylinders in Commercial and Military Scuba Diving applications • Almost every airline in the world uses it for filling on board emergency cylinders • Maximum operating pressure up to 5,000 psi Specifications: • Transfer and pressurised Halon • Ability to pump Halon into the extinguisher against the pressure of Nitrogen • This unit has the ability to extract high cost of Halon vapor back to liquid by passing it through a condenser.

We supply complete sytems for Chemical Injection. We have a close cooperation with the main component suppliers and will custom design systems according to your specifications. Our deliveries include: • Pump skids • Tank skids • Chemical Injection Unit – CIU • Multipurpose Chemical Injection Systems • MEG / Methanol Injection Skids • Chemical Distribution Panels

Working as your partner, we can supply a wide range of control panel types: • Local Control Panels for actuated valves • Pneumatic • Hydraulic • with and without accumulators • Surface Control Panels for downhole tools • Ballast Control Panels • Motor Starter Panels • PLC / EX Enclosures • HMI Control Panels Our Innovation & Experience ensures that you get practical and well tested solutions.

Our sister company Anzett designs and manufactures the complete range of fire fighting systems for the oil and gas industry. The company’s extensive experience and its production and supply of a wide range of special equipment enables us to meet the most demanding requirements within this field. The company’s product range includes the following systems: • Deluge / Sprinkler Systems • Hose Reels • Hydrants • Monitors • Dual Agent Systems • Water Mist Systems • Foam Systems • Powder Systems • Gas Systems In all project planning and installation of fire fighting systems there is a high demand for safety. Some of the most typical installations are on production platforms, shipboard engine rooms and other sensitive areas. Since starting with fire fighting systems in 1996, Anzett has been one of the most successful suppliers to the Norwegian market. The company’s future development will focus on the international market.

Hydraulic Power Units have a wide range of operational areas. Hitec Products has delivered to Topside, Subsea and Drilling applications. The main application areas are: • Subsea Production HPU • Topside Wellhead HPU • Ballast HPU • Topside HPU for Hydraulic actuated valves • Drilling HPU • Test and Flushing HPU • Installation Workover System / HPU The HPU provides a stable and clean supply of hydraulic fluid to topside or remotely operated subsea valves or tools. There is high focus on system design and assembly with regards to HSE, Man-Machine-Interface (Controls), reliability and cleanliness. The majority of our systems are developed in accordance with client specifications, we can also offer standard HPUs.

Our industry is rapidly growing and the need for test equipment is rapidly increasing. We design and build equipment in accordance with clients needs and specifications. In addition we have developed a range of test equipment that is innovative with regards to control and operation, these automated systems are designed to reduce client man-hours. We also provide systems on a rental basis We can offer the following test equipment: • Test And Flush Hydraulic Power Units • Frequency controlled TFHPUs • Test HPU • Pressure Test Skid • Test Stand for Subsea Control Module • Custom Automated Test systems • Fluid Cleanliness Kits

We can offer complete turnkey solutions including Project Management, and a combination of inhouse production and sourcing of key components. We have the necessary human resources, operative skills and technology to be an integrated partner throughout all project stages, from conceptual design through engineering, procurement and construction to installation, commissioning and after-sales service. Our Turnkey solutions include: Fluid Control on Topside projects: • Wellhead Control System • Local Control Room • Hydraulic Systems & Power Units • Local Control Panels • Ballast Control System • Chemical Injection and dosing systems • MEG / Methanol / Ethanol Injection skids • Fire Fighting Systems Subsea Control Systems: • Installation Workover Control System • Intervention Control Systems • Launch & Recovery Systems (LARS) • Umbilical & Reeler • Deck Jumpers • Remote Control Panels • Production Hydraulic Power Unit • Topside Umbilical Termination Unit • Subsea Control Module Test Stand • Test & Flush Equipment • MEG / Methanol / Ethanol Injection skids

We are the market leader in designing and supplying Workover Control Systems. Our range of Workover Systems are designed to meet our clients needs, and can offer smaller Direct Hydraulic systems to large state of the art IWOCS. We have developed systems for both tropical and arctic environments. Our latest deliveries have been designed in accordance with NORSOK S-002 with focus on the operators environment. We can offer: • Direct Hydraulic Workover Systems – DH WOCS • Installation Workover Control Systems – IWOCS • Workover Hydraulic Power Unit – WOCS / HPU • Master Control Panel • Electro Hydraulic Systems • Multiplex Systems • Remote Control Panels • Emergency Shutdown Panels • Rig Interface Equipment • Deck Jumpers • Surface Flow Tree Panels • Umbilical Reel with Umbilical