您所在的位置: 首页 > 展品列表
共找到 64 条符合的查询结果

展品列表

斯瓦克石油振动筛网 石油振动筛网 石油振动筛网
斯瓦克石油振动筛网 石油振动筛网 石油振动筛网

石油钻井用筛网, 可广泛应用于不同条件下的钻井作业中。该产品通常由 2 到 3 层不锈钢筛网布粘合在开孔的金属衬板上构成 . 同时,筛网附带专用的橡胶塞以修补网面破损,可有效地节省时间,降低生产成本。

中国 河北省其他展品 最近更新:2013-02-17
石油振动筛网 石油泥浆振动筛网 框架式振动筛网
石油振动筛网 石油泥浆振动筛网 框架式振动筛网

 框架振动筛网是一种常用的石油振动筛网,主要由钢制框架和紧密结合在框架上的2到3层构成。该框不锈钢网布架由高强度方形钢管或扁钢焊接而成,并带有多条加强支撑筋,网布可通过金属衬板与框架结合,或直接粘合在框架上。每张筛网均附带专用的橡胶塞以修补网面破损。我厂可根据不同客户的需求制造多种规格尺寸的钢框架筛网。

中国 河北省其他展品 最近更新:2013-02-17
JSAS抽油杆扶正刮蜡器
JSAS抽油杆扶正刮蜡器

产品描述: 一种新型的机械清蜡和防止抽油杆偏磨专利技术“抽油杆扶正刮蜡器”已由我公司设计并试制成功,使用时间可长达数年。从此以后,抽油机井靠热洗和化学清蜡的方法将遭受严峻挑战。抽油杆扶正刮蜡器由刮蜡片和一对刮蜡片限位卡子组成:刮蜡片是一个弹性开口圆筒、外径59毫米(可以通过内径58.5毫米的油管)、内径56毫米、长110毫米、重0.25公斤。限位卡子安装在刮蜡片的两端。抽油杆扶正刮蜡器用手内径为62毫米的油管、规格分别有19毫米、22毫米、25毫米。它适合所有抽油机井的清蜡和防止抽油杆对油管的偏磨,对原油物性没有任何要求。

中国 湖北省其他展品 最近更新:2013-01-16
HPUs(高压动力单元)
HPUs(高压动力单元)

HYDROSYS has systems that are specially designed to flush sub-sea trees, BOPs and actuators control, with high pressure pumps installed. Units can also be designed for high pressure testing in various products easily and safely. These are just some of the systems that we have customized to meet different customers’ requirement. MOBILE FLUSHING HPU: Simple compact design for mobility. Easy setup and operation. Flexible high pressure hose for accessing hard to reach subjects with reel for easy & convenient storage. Other customizable options available. HYDRAULIC ACTUATOR CONTROL SYSTEM: Customized system for controlling existing customer’s actuator system. Charged accumulator ensures smooth and constant pressure control. Unit comes with a set of high pressure hoses and quick disconnect couplings. Unit comes with a set of high pressure hoses and quick disconnect couplings. Unit comes with a set of high pressure hoses and quick disconnect couplings. LARGE VALVE HYDROTESTER: Testing of large valves with high pressure liquids. Liquid pump able to provide testing pressure up to 22,500 psi. Provides quick pressure build up with higher flow rate for efficient testing of larger valves. Built in safety features such as in-operation light, door open cut-off switch and sliding rack for operator’s safety. The HPU unit consists of three separate steel fabrications which together, contain equipment for performing flushing and HIGH-LOW pressure testing of components under manual control. The systems are designed to provide functionality to the Test & Flushing Test System with the following: This system comprises of two stand-alone cabinets each measuring approx. 320 cm long x 61 cm deep x 250 cm high to house the pumps and the air operated valves. The 1000 litre S/s tank is mounted separately. And Accumulators will be required except for HP test pump, Hydraulic fluid: HW44R, The proof pressure shall not be less than 1.65 times working pressure. The control panel is mounted outside the test cell with dimension of 105 x 105 x 55 cm. The control will come from a free standing control panel located outside the test bay. The location of the cooler is yet to be finalised but will be in a location agreed with the customer and probably at floor height. The system will be designed so that it can be updated at a later stage to run from a PLC. Low pressure Test circuits use the aforementioned pump supplied with fluid from the main reservoir. Medium pressure Test Circuit use the aforementioned air driven pump. High pressure Test Circuit use the aforementioned air driven pump. All the design above are splash proofed. A. LP testing FLOW:4LPM@7500psi, Port: 1.LP test 1 Supply 7500psi,1/2 JIC male,; 2.LP1 test chart recorder conn; 3.LP 1 Supply,5000psi.1/2 JIC Male; 4.LP test 2 Supply 7500psi,1/2 JIC male; 5.LP 2 test chart recorder conn; 6.LP 1 Supply,5000psi.1/2 JIC Male. B.1 HP testing FLOW:1.5LPM@10,000psi, Port: 1.HP 1 Supply,10,000psi,3/8\" Autoclave BU; 2.HP 2 Supply,10,000psi,3/8\" Autoclave BU. B.2 HP testing FLOW:0.2LPM@15,000psi, Port: 1.HP test 1 Supply 15,000psi,3/8Autoclave BU; 2.HP 1 test chart recorder conn; 3.HP 2 test Supply,15,000psi,3/8Autoclave BU; 4.HP 2 test chart recorder conn. C.Flushing FLOW: 40LPM@3000psi, Port: 1.Flushing supply 1,1500psi,3/4 JIC; 2.Flushing Supply 2,500psi,3/4 JIC; 3.Flushing return 1,3/4 JIC; 4.Flushing return 2,3/4 JIC. HPU系统设备由3个独立的钢制结构组成:分别是人工控制低压测试设备、高压测试设备和执行冲洗的设备。 该系统是专为实现高中低压测试和串洗试验功能设计的,包含下列组成部分: 试压压泵和气动阀被分别独立安装在两个尺寸为长320厘米 x 宽61厘米 x 高250厘米的机柜里。 独立装有1000升的不锈钢水槽。除高压测试部分的增压泵以外,都安装配有缓冲罐。设备的测试压力大于等于1.65倍的工作压力。控制单元尺寸为长105厘米 x 宽105厘米 x 高55厘米的机柜。 控制将采用独立式的控制面板安装在测试现场以外。 冷却装置按照客户要求安装,或者安装在机柜顶部。 整套系统设计可以在以后通过PLC来升级更新。 低压测试模块/中压测试模块/高压测试模块。

中国 北京市其他展品 最近更新:2012-02-28
SFU型旋流气浮污水处理系统
SFU型旋流气浮污水处理系统

主要用途 CFS型旋流气浮系统是一种高效节能的污水处理新技术,其主要用途有: •对海洋及陆地油气田产水中的乳化油及其它微细悬浮颗粒进行高效分离,使产水达到规定的排放标准。 •去除化工、化纤、炼油、造纸、皮革、印染、毛纺、机械加工等工业废水中的微细悬浮颗粒(如乳化油、羊毛脂、细小纤维、纸浆等),对污水进行净化处理。 技术特点 •分离效率高,出水水质好,性能稳定,出水含油率可达 <10ppm。 •适应范围宽广,特别适用于含重质油和微细悬浮颗粒的污水处理。 •结构紧凑,重量轻,占地面积小。 •无需外部动力,能耗低。 •无运动部件,工作可靠,操作简单,维护费用低。 •模块设计,成撬安装,运输和安装方便。 •由于采用立式筒体,其除污效率对浮式海洋平台的晃动不敏感。 主要技术指标 •污水处理能力:10、25、50、100、150、200、250、300 m3/h •入口污水含油量范围:一般≦ 3,500 ppm •出口水含油量:≦10 – 50 ppm (取决于入口污水的含油量和气浮筒的串联级数) •设计压力:≦ 0.4MPa •使用温度:≦ 90℃ •每级压力损失: 0.005 MPa •气浮介质:氮气,天然气,或空气(非油气处理场合)。 电子电器部件 •环境温度:-20 – 60 ºC •串行端口:RS485 •通讯协议:Modbus RTU •供电电源:220 VAC 或24 VDC •能耗: 50W •防护等级:IP65 •防爆等级: Exib II CT4-T6。

中国 天津市其他展品 最近更新:2012-02-22
SCSSV 高压测试系统
SCSSV 高压测试系统

地面控制井下安全阀测试系统High Pressure SCSSV Test System This system comprises of three high pressure liquid pumps and a gas booster. They are uniquely plumbed together with high pressure tubing, fittings, air actuator valves and other accessories to test the reliability of the SCSSV which are used in sub-sea applications. With the incorporation of a PLC and special control valves, this system can be operated easily with the least supervision and great accuracy.

中国 北京市其他展品 最近更新:2012-02-21
JAB高压气体压缩机
JAB高压气体压缩机

JAB高压气体压缩机简介: JAB-High pressure compressors, with a compact and tough design, grant a reliable and economic operation for a multitude of applications. They have a highly effective cooling system, high volumetric effective rate, long service life of valves, high efficiency and are easy to maintain. In standard execution they are equipped with pressure gauges and safety valves for all pressure stages. Optional pressure switches for electric pressure-stage supervision as well as electric control units for automatic operation or individual demands are available. JAB-High pressure compressors are particularly used in the energy industry, for pressure testing, breathing air application, gas injection-molding as well as for laser technology. Quality, reliability and cost effectiveness distinguish the breathing air compressor series. These characteristics are proven daily by many customers

中国 北京市其他展品 最近更新:2012-02-21
液压动力单元
液压动力单元

HPU (Hydraulic Power Units) These systems are specially designed to flush the Sub-sea trees, BOPs and actuators, with the high pressure pump installed. It can perform high pressure testing in various products easily and safely. This unit is incorporated with PLC, special electronic devices and a touch screen monitor to optimise the system to its maximum capability. There are other options available depending on our customer’s requirement. 设备可根据用户需求定制! 更多产品详细信息欢迎您来电咨询北京海德利森科技有限公司!

中国 北京市其他展品 最近更新:2012-02-21
Charging Cart for Air Craft Tyre
Charging Cart for Air Craft Tyre

Charging Cart for Air Craft Tyre Self contained charging cart (no air or electrical source required), amplifies liquid nitrogen to 3000 psi. Two selectable ranges of 300 psi and 3000 psi pressure that comes with special pneumatic controls to stop the booster automatically when the desired output pressure is reached. The Possibilities Are Infinite!

中国 北京市其他展品 最近更新:2012-02-19
Portable Test Pacs
Portable Test Pacs

Portable Test Pacs: These Test Pacs are self contained, ready to operate units, which only require nominal air supply pressure to perform a hydrostatic test on the components. The maximum pressure is up to 100,000 psi. Specifications: • 8 HP Haskel pump • Maximum pressure of 22,500 psi • Flow rate of approximately 2 liters/min Specifications: • 6 HP Haskel pump • Maximum pressure of Specifications: • 1.5 HP Haskel pump • Maximum pressure of 15,000 psi • Flow rate of approximately 0.45 liters/min 10,000 psi • Flow rate of approximately 4 liters/min

中国 北京市其他展品 最近更新:2012-02-19
64 条记录 1/7 页 下一页  1  2   3   4   5  下5页 最后一页