网上展台
飞鹰过程控制有限公司
FLYING EAGLE PROCESSCONTROLS LTD
展商简介：
飞鹰过程控制有限公司(以下简称飞鹰)是一家香港公司，始建于1979年。主要代理国外著名公司的工业仪器、仪表以及工业测量控制仪器等的销售及售后技术服务
我们代理的主要产品有：美国Fike公司爆破片和防爆系统；美国Farris Engineering公司安全阀系列；美国Protectoseal公司的呼吸阀，减压阀，阻火器，氮封阀等；美国Clark-Reliance公司锅炉水位表及变送器，疏水器，温度控制设备；美国Jerguson公司的高压液位表；美国ITT Neo-Dyn公司的压力开关系列；美国Conax公司温度传感器和密封件等。产品广泛应用于食品、化工、橡胶、塑料、造纸及石油等行业。
飞鹰公司总部位于香港，并在北京、上海、成都及深圳设有办事处，共有雇员50余人，其中90%以上人员为经过国外生产厂家正规培训的销售工程师及售后服务技术工程师。
各办事处所做产品基本相同，只是面向中国不同区域的用户。我公司的宗旨是用户至上，用我们精湛的技术为您提供优质的服务。
我们提供的服务：提供以上各项产品的技术咨询、售前服务、售后服务、用户技术培训。
Company Profile Flying Eagle Process Controls Ltd. formerly is a subsidiary company of Eagle Process Controls Ltd. which established its business in Hong Kong since 1979 for selling instrumentation equipment in Hong Kong, China and Asia. Eagle had branch offices in Taiwan, Philippines, Korea and three Representative offices in China, including Beijing, Shanghai Chengdu and Guangzhou. In August 1994 Mr. James A. Collins, the founder of Eagle Process Controls Ltd., retired and the Taiwan, Philippines and Korea branch offices were converted into local incorporated company and sold to the existing local staff. Eagle business in China and Hong Kong has been taken over by the present management since then. Mr. James A. Collins remains in Eagle China as consultant. At present we have more than 50 Engineers. These engineers have an average 5-10 years relevant experience. At present we have a sales office in Hong Kong, four sales offices strategically located in China (Beijing, Shanghai, Chengdu and Shenzhen). We have experience in the Petrochemical Industry, Oil and Gas, Power Industry and the Chemical Industry. The markets that we concentrate are instrumentation market and material handing material market. We handle both markets by the same group of people until year 2009. In order to more concentrate on developing the material handling market ,we set up a new department-Material Handing Department to handle the material handling business. We have over ten agency contracts that allow us to sale U.S.A and European process controls products in China. Since we have a wide range of product, we have the capability to handle the turnkey project. This is the advantage for us to deal with the customer because it will save them some time to source around. Here are the products that we represent: Farris safety valve; Protectoseal Pressure/Vacuum Relief Vents, Flame Arresters,Tank Blanketing Valves; Fike Rupture Disc, Explosion Protection; Clark Boiler Level Insturementation; ITT Neo-Dyn Pressure Switch; Conax Temperature Sensor Assemblies. 1. For Material: A. Flow Measuring System Flow Dynamics B. Verbruggen Flat Die C. Pneumatic System a. Guerin-For large size pneumatic system b. Spiroflow-For small size pneumatic system 2. Instrumentation: A. Valve line Such as Badger Research valve. B. Level Gauge and transmitter Such as ITT Barton, Clark Reliance and Jerguson C. Flow meter line Such as ITT Barton and Badger Meter D. Safety Product: Teledyne Farris Pressure Relief Valve Fike Corporation–Rupture Disc and Fike Explosion Protection System In order to penetrate the market, we locate the field design institute and have our engineers visiting them periodically so that we could build up the relationship with the designer and access new project information. Although there are a lot of trading company in China , they may only give you the advantage to win the business in short term. Flying Eagle Process is difference from them because: 1. We have our own offices in Beijing, Shanghai, Chengdu, Shenzhen and Hong Kong. Since the project in China may involve the designer, end-user and the purchaser located at different location, we could have our own people visiting them at different location and build up the relationship with them. For the trading company, most of them only have one or two office in China. Therefore, it is not easy for them to co-operated and win the job as they will only think about their own advantage instead of your advantage. 2. We are a company willing to invest money on training our engineers which we belief is utmost important for both our principal and ourselves on a long run. For those trading companies, they may have money but may not be willing to invest on training. The way to promote your product is very different from the way to promote other consumable products. The sales engineers have to have an in sight knowledge about the products. Therefore, we consider training is important. We have sent four engineers to train at our principals at USA and Switzerland. 3. We also understand after sales service is very importance. Therefore, we have our own service engineer to service our customer for after sale service. The service engineer has been sent to Switzerland, Italy and Singapore for training. We also periodically send the service engineer for training so that we could make sure our service to the customer is the best.
Company Profile Flying Eagle Process Controls Ltd. formerly is a subsidiary company of Eagle Process Controls Ltd. which established its business in Hong Kong since 1979 for selling instrumentation equipment in Hong Kong, China and Asia. Eagle had branch offices in Taiwan, Philippines, Korea and three Representative offices in China, including Beijing, Shanghai Chengdu and Guangzhou. In August 1994 Mr. James A. Collins, the founder of Eagle Process Controls Ltd., retired and the Taiwan, Philippines and Korea branch offices were converted into local incorporated company and sold to the existing local staff. Eagle business in China and Hong Kong has been taken over by the present management since then. Mr. James A. Collins remains in Eagle China as consultant. At present we have more than 50 Engineers. These engineers have an average 5-10 years relevant experience. At present we have a sales office in Hong Kong, four sales offices strategically located in China (Beijing, Shanghai, Chengdu and Shenzhen). We have experience in the Petrochemical Industry, Oil and Gas, Power Industry and the Chemical Industry. The markets that we concentrate are instrumentation market and material handing material market. We handle both markets by the same group of people until year 2009. In order to more concentrate on developing the material handling market ,we set up a new department-Material Handing Department to handle the material handling business. We have over ten agency contracts that allow us to sale U.S.A and European process controls products in China. Since we have a wide range of product, we have the capability to handle the turnkey project. This is the advantage for us to deal with the customer because it will save them some time to source around. Here are the products that we represent: Farris safety valve; Protectoseal Pressure/Vacuum Relief Vents, Flame Arresters,Tank Blanketing Valves; Fike Rupture Disc, Explosion Protection; Clark Boiler Level Insturementation; ITT Neo-Dyn Pressure Switch; Conax Temperature Sensor Assemblies. 1. For Material: A. Flow Measuring System Flow Dynamics B. Verbruggen Flat Die C. Pneumatic System a. Guerin-For large size pneumatic system b. Spiroflow-For small size pneumatic system 2. Instrumentation: A. Valve line Such as Badger Research valve. B. Level Gauge and transmitter Such as ITT Barton, Clark Reliance and Jerguson C. Flow meter line Such as ITT Barton and Badger Meter D. Safety Product: Teledyne Farris Pressure Relief Valve Fike Corporation–Rupture Disc and Fike Explosion Protection System In order to penetrate the market, we locate the field design institute and have our engineers visiting them periodically so that we could build up the relationship with the designer and access new project information. Although there are a lot of trading company in China , they may only give you the advantage to win the business in short term. Flying Eagle Process is difference from them because: 1. We have our own offices in Beijing, Shanghai, Chengdu, Shenzhen and Hong Kong. Since the project in China may involve the designer, end-user and the purchaser located at different location, we could have our own people visiting them at different location and build up the relationship with them. For the trading company, most of them only have one or two office in China. Therefore, it is not easy for them to co-operated and win the job as they will only think about their own advantage instead of your advantage. 2. We are a company willing to invest money on training our engineers which we belief is utmost important for both our principal and ourselves on a long run. For those trading companies, they may have money but may not be willing to invest on training. The way to promote your product is very different from the way to promote other consumable products. The sales engineers have to have an in sight knowledge about the products. Therefore, we consider training is important. We have sent four engineers to train at our principals at USA and Switzerland. 3. We also understand after sales service is very importance. Therefore, we have our own service engineer to service our customer for after sale service. The service engineer has been sent to Switzerland, Italy and Singapore for training. We also periodically send the service engineer for training so that we could make sure our service to the customer is the best.
产品展示：
cippe线下展会参展记录：
企业动态：
暂未发布企业动态...
观众评价：
暂无观众评价...